Tight Radius Partitions at Neptune Wharf

Tight radius partitions look effortless once finished, but they are far from simple to form accurately on site.

NewRise Drylining needed tight-radius partition sections for the residents’ amenity space at Neptune Wharf, delivered for Galliard Homes.

We designed and manufactured the curved sections offsite.

As a result, this helped the site team achieve the intended geometry, with less cutting, forming and uncertainty on site.

Project Snapshot: Tight Radius Partitions

Curved partition features for a high-quality residents’ amenity space

Drylining contractor: NewRise Drylining
End client: Galliard Homes
Application: Residents’ amenity space
What we supplied: Design support and offsite-built tight radius partition sections

From Workshop to Finished Space

The Tight Radius Partition Challenge

Turning tight radius details into a practical site installation

NewRise Drylining needed a reliable way to deliver the tight radius partition details.

This also had to fit within the wider drylining package at Neptune Wharf.

These curves were an important part of the finished design, but forming them accurately on site would have added time, cutting and uncertainty. Small variations in the radius could also affect the clean, seamless finish expected across the amenity space.

In short, the challenge was to turn the design intent into consistent, buildable sections that the drylining team could install without having to form every curve from scratch on site.

Our Tight Radius Partition Solution

Offsite-built curved sections for controlled, consistent delivery

Innovate at SA worked from the project requirements to design and manufacture the tight radius partition sections in our workshop.

Taking the difficult forming work offsite gave NewRise Drylining a more controlled and buildable solution for the curved elements. Instead of creating each radius from scratch on site, the team received prepared sections designed around the required geometry.

This approach helped provide:

✓ More consistent curved geometry
✓ Less cutting and forming on site
✓ A cleaner, more practical installation
✓ Better control over the finished detail

Our role focused on the specialist curved sections, while NewRise Drylining delivered the wider drylining package and completed the installation on site.

“Our supply chain partner Innovate at SA provided the design and supply of the off-site built tight radius partitions.

Their expertise played a key role in delivering the seamless curved elements that helped define this space.”

Source: NewRise Drylining on LinkedIn

What We Delivered: Tight Radius Partition Sections

1. Design support for the curved partition requirements

2. Offsite-built tight radius partition sections

3. A practical drylining solution for feature curved elements

4. Collaborative support to assist successful project delivery

The Outcome: Tight Radius Partitions Delivered

Curved partition elements contributing to a high-quality finished space

The completed amenity space also includes co-working areas, lounge spaces, a cinema room and toilet facilities, with curved features helping to define the finished environment.

Because the curves were built offsite, the project team had a practical route from design detail to installation.

NewRise Drylining completed the wider package on site, while our prepared sections supported the specialist curves within the scheme.

Overall, the finished photographs show exactly why these details matter. When the geometry is right, the curves look effortless and become part of the architecture rather than something that draws attention for the wrong reason.

NewRise Drylining also recognised Innovate at SA’s contribution publicly, providing valuable independent confirmation of the role our offsite expertise played in the project.

Why Offsite Tight Radius Partitions Make Sense

Less Site Cutting

As a result offsite manufacture reduces the amount of cutting and forming required on site.

Consistent Geometry

In turn, CNC-controlled processes deliver accurate, repeatable curved profiles every time.

Cleaner Workmanship

Because production happens in controlled factory conditions, the finish is consistently higher than with site-based methods.

FAQs

What is a tight radius partition?

Essentially, a tight radius partition is a curved plasterboard wall formed to a much smaller radius than would normally be practical using traditional site methods. They’re often used in offices, hotels, residential developments and feature spaces where architects want smooth flowing curves rather than straight walls.

Why manufacture curved partitions offsite?

Manufacturing curved partitions offsite allows the difficult work to be completed in a controlled workshop environment. This also improves consistency, reduces site cutting and helps contractors install complex curved features more efficiently.

Can you manufacture curved plasterboard walls to our drawings?

Yes. Simply send us your drawings and we’ll manufacture the curved plasterboard sections to suit your project. If needed, we can also help develop a practical manufacturing solution before production begins.

What types of projects use curved partitions?

In practice, curved partitions are used on a wide range of projects including commercial fit-outs, hotels, apartment developments, reception areas, leisure facilities, offices and other spaces where curved architectural features form part of the design

Are offsite curved partitions quicker to install?

In most cases, yes. Because much of the cutting and fabrication has already been completed in our workshop, installation on site is generally faster, cleaner and more consistent than forming tight curves entirely on site.

Can you manufacture different curve radii?

Yes. Every project is different, so we manufacture curved partitions to suit the radius shown on your drawings, whether it’s a gentle curve or a very tight radius feature.

Do you only manufacture curved partitions?

No. Curved partitions are just one of the offsite plasterboard solutions we manufacture. We also produce deflection head strips, folded plasterboard, baffle boxes, column casings, pattress kits, bulkheads, ceiling features and a wide range of CNC-cut plasterboard components.

Do you supply projects throughout the UK?

We manufacture everything from our workshop in Essex and also supply contractors working on projects across the UK

Who do you work with?

We also work with drylining contractors, interior fit-out contractors, main contractors and specialist subcontractors looking to move repetitive or technically challenging plasterboard work offsite.

Can you help during the design stage?

Yes. Getting involved early allows us to review the curved details, suggest practical manufacturing methods and help make sure the design can be delivered efficiently once it reaches site.

What is curved plasterboard used for?

Curved plasterboard is used to create feature walls, reception areas, columns, bulkheads, ceilings and other architectural details where straight partitions won’t achieve the required appearance. Overall, it’s a popular solution in commercial, hospitality and residential projects.

What are the benefits of offsite plasterboard fabrication?

Offsite plasterboard fabrication helps reduce site cutting, improve accuracy, minimise waste and speed up installation. By completing the complex work in our workshop, contractors receive components that arrive ready to install, helping improve productivity and finish quality.

How can I get a quote for tight radius partitions?

Simply send us your drawings using our Send Drawings page or get in touch with the team. We’ll review the project, discuss the curved details with you and provide a quotation for manufacturing the offsite curved partition sections.